automatic wire nail making machine(nail producing machine) 1-6 inch,best selling in Africa
Wire nail making machine(nail producing machine,nail producing equipment,nail manufacturing machine) is the machines to make wire nails(common nails).
Welcome to visit our new website at:
A wire nail having a head and a shank integral with the head, the shank being formed with a tip and having an axis, and the head having a circumferential edge defining a complete circle; characterised in that the centre of the head is radially offset from the axis of the shank.
Q195 (SAE1008),235 Raw Materialsteel wire to make nails:
The line to make wire nails is wire drawing machine,wire nail making machines,nail polishing machines.
The function of each machine in the line is:
Wire drawing machine
draw the raw material steel wire Q195 or Q235 of diameter 6.5 mm to the diameter for nails,for example diameter of 3.5 mm,3.0 mm etc for different length nails.
Nail making machine:function of nail making machine is the machine cut the steel wire into nails and make nails head.
Nail making machine and powder wire drawing machines with speed control (by using frequency converter) in customer's factory :
Nail making machine videos:
C series is our new designed product with the advantages of :
Very low noise,the noise will not let people feel uncomfortable .
Auto lubrication:just add the lubricant into the small oil tank,then the machine can lubricate machine parts automatically.
Bearing structure and longer lifetime.
Nail polishing machine:When the nails comes out from the nail making machine,it is not so smooth and bright,to make it bright and have a good selling appearance,it needs to be polished.Concerning for the polishing steps,firstly put the nail in the polishing drum,then put some saw dust onto the nails,then cover it and start the machine, in general it needs 2 hours ‘polishing.
These 3 machines are main machine to make wire nails.
Beside these 3 machines,there are some small machines:
Sharpening mill:this machine is to sharpen the head of steel wire before it is feed into the wire drawing machine,the principle of the drawing machine is that using different size of drawing dies,for example,to draw steel wire of 6.5 mm to 5.8 mm,we can use a drawing die of 5.8mm,sharpen the head of 6.5mm steel wire less than 5.8 mm first,then put the head into the die,then fix the head of the wire to the wire drawing machine,then start pulling.after the wire come through the die,all the wire becomes diameter of 5.8mm.
Nail knife grinder:because after 1-2 days cutting,the nail knife installed on the wire nail making machines will become blunt,then you can use the nail knife grinder to grind the nail knife to make it sharp again.
Butt welding machine:in case the wire breaks during drawing,you can use the butt welding machine to weld the broken wire together ,then continue the drawing.without this machine,if the wire breaks,you need to sharpen the
wire head again and do all things from the start.
Spare parts of the nail making machine :
Nail knife:cut the steel wire into different length such as 30mm,45mm etc.nail length can be adjusted from 5-150 mm.
Nail mould:To clamp the steel wire for the nail knife to cut.
Pin punch:make nail head.
Dies for wire drawing machine.
Good Quality Wire Reel Wire Stand for the Nail Making Machines:
Our Customers shows from Kenya, Tanzania, South Africa, Uganda, Ethiopia etc: